|
In-line Axial Fans
|
|
For Fume Control applications where the static pressure requirement is not too high eg. Canopy with discharge cowl, an in-line axial fan is often the best solution. Aerovent Australia manufacture a full range to suit almost every
Fume Control application.
|
Volume:
|
to 380,000 m3/hr
|
Pressure:
|
to 1.25 kPa
|
|
Temperature:
|
to 350°C
|
Case
Construction:
|
Carbon Steel,
Stainless Steel |
|
Finish:
|
Hot Dip Galvanised
, Epoxy |
Impeller Construction: |
PPG, Aluminium, Carbon Steel, Anti-static, Stainless Steel
|
|
Drive: |
Direct or Belt |
Motors: |
Standard/High Efficiency, Exe, Exd, Ext
|
|
Options:
|
Silencers/Attenuators |
|
|
|
|
Roof Mounted Axial Fans
|
|
With the fan mounted on the roof, these fans are typically used on free inlet applications and are available in either vertical or horizontal discharge configurations. They provide air changes in factories to manage fume build-up and maintain a comfortable environment. Aerovent Australia manufacture a full range to suit almost every
Fume Control application.
|
Volume:
|
to
144,000 m3/hr
|
Pressure:
|
to
1.25 kPa
|
|
Temperature:
|
to 80°C
|
Impeller
Construction:
|
PPG, Aluminium, Carbon Steel, Anti-static
|
|
Motors:
|
Standard/High Efficiency, Exe, Exd, Ext
|
|
|
|
|
Nickel Series – Backward Inclined Centrifugal Fans
|
|
Aerovent Australia manufacture a range of pre-engineered fans
specifically designed for the Fume Control market. Featuring a compact design and heavy duty construction for trouble free service, these fans are available in arrangement 4 for pedestal/floor mount or arrangement 4F for inlet flange mount applications.
|
Volume:
|
to 27,000 m3/hr
|
Pressure:
|
to 7 kPa
|
|
Temperature:
|
to 80°C
|
Construction:
|
Carbon Steel
|
|
Finish:
|
Enamel
|
Motors:
|
1.5 to 22 kW Standard Efficiency Class F
|
|
Options:
|
Spark Resistant, silencer/attenuators,
cowls, flanges, special finishes
|
|
|
|
|
Backward Curved/Inclined Fans
|
|
Aerovent Australia can also design and manufacture purpose built SWSI centrifugal fans to suit specific Fume Control applications. Available in belt or direct drive arrangements, these fans are made to the highest quality standard with a heavy duty design for peace-of-mind and trouble free service.
Designed to suit a specific Fume Control application, these fans are available with multiple options.
|
Volume:
|
to 700,000 m3/hr
|
Pressure:
|
to 10 kPa
|
|
Temperature:
|
to 650°C
|
Construction:
|
Carbon Steel, Stainless Steel
|
|
Finish:
|
Enamel, Hot Dip Galvanise, Epoxy
|
Motors:
|
Standard/High Efficiency
|
|
Drive:
|
Belt or Direct
|
Impeller Size:
|
∅315 to ∅4000mm
|
|
Options:
|
Spark Resistant, silencer/attenuators,
cowls, flanges, special finishes
|
|
|
|
|